Pauluhn DFLA LED Hazardous Area Floodlights

Certifications and compliances

NEC/CEC

• Class I, Division 2, Groups A, B, C, D
• Class I, Zone 2
• Class II, Division 1, Groups E, F, G
• Class II, Zone 21 (DFLA9L-15L only)
• Type 4X, IP66

UL standards

• UL844, UL1598, UL1598A
• UL8750 (DFLA9L-15L only)
• UL50, UL50E (DFLA9L-15L only)

CSA standard

• CSA C22.2 No. 137
• CSA C22.2 No. 250.0 (DFLA9L-15L only)
• CSA C22.2 No. 250.13 (DFLA9L-15L only)
• CSA C22.2 No. 94.1 (DFLA9L-15L only)
• CSA C22.2 No. 94.2 (DFLA9L-15L only)

• Six models from 9,000 to 25,000 lumens for a wide range of floodlighting applications
• Provides up to 60,000 hours rated life at 55°C – eliminates need for frequent lamp replacement
• Die cast aluminum heat sink increases surface areas and improves airflow, optimizing both LED and driver life
• Energy-efficient technology – up to 72% energy savings over HID fixtures
• Minimum T3C temperature rating – safely operate in the most hazardous environments and any non-hazardous location
• Shock- and vibration-resistant solid state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
• Easy installation – yoke design to mount to existing Crouse-Hinds series SFA6 slipfitter and SWB6 wall mount
• Instant illumination and restrike
• Cold temperature operation/no warm-up required
• Dimmable driver, 0-10V
• Serviceable drivers
• Contains no mercury or other hazardous substances
• Operating ambient -40°C to 55°C

• Lamp housing and adapter – die cast aluminum with Corro-free epoxy powder coat
• Lens – heat- and impact-resistant glass (standard)
• Gaskets – silicone
• External hardware – stainless steel